Eppendorf Mastercycler nexus User Manual

Page 72

System management
Mastercycler

nexus

English (EN)

System Configuration

: Set

device-dependent entries for
ramp and gradient

Making changes under

System Configuration

is only necessary if you

operate different variants of master and eco devices together.

 Mark the

System Configuration

node. Press the

Set

softkey.

 Set entries for the ramp.

• For devices with an aluminum thermoblock, select Mastercycler

nexus. Adjustable value range: 0.1 - 1.5 °C/s or

max.

• For devices with a silver thermoblock, select Mastercycler nexus

SX1. Adjustable value range: 0.1 - 3.0 °C/s or

max.

 Set entries for the gradient spread.

• Select the setting 20°C for devices with the 96-well thermoblock,

which have a gradient function.If the setting Off is selected, no
gradients can be programmed and the corresponding programs
cannot be started.

• Select the setting 12°C for devices with the 64+32-well thermoblock,

which have a gradient function. If the setting Off is selected, no
gradients can be programmed and the corresponding programs
cannot be started.

• Use the

Show well types

checkboxes to define which well types are

displayed under

Edit Grad.

(see p. 55).

User Log File

: Display or export

user data

Use the

User Log File

node to export or display all performed actions as a

log file. The following data can be displayed or exported:

• Login and logout procedures
• Changes to and interventions in running programs
• Update of the software version
• Creating and deactivating service intervals