Eppendorf Mastercycler nexus - Manual (Page 28)

Installation
Mastercycler
® nexus
English (EN)
28
4.2 Installing the instrument
This section describes how to put the device into operation and how to connect one or two eco devices to a
master variant of the Mastercycler nexus.
4.2.1 Connecting the device to the power supply
Information on the power consumption of the Mastercycler nexus is provided separately (see Power supply
on p. 97).
 Connect the mains connection socket to the power socket using a power cable.
WARNING! Risk from incorrect supply voltage
 Only connect the device to voltage sources which correspond to the electrical
requirements on the name plate.
 Only use sockets with a protective earth (PE) conductor and suitable power cable.
NOTICE! Sample loss due to interruption of the mains/power supply.
If you use multiple sockets, the current consumption of several devices may exceed the power
current strength. The mains/power fuse interrupts the mains/power supply. The devices do
not receive any power. The running programs will be aborted.
 Connect the mains/power cord of each device to an earth/grounded socket.
 Do not use multiple sockets.