Eppendorf Mastercycler nexus User Manual

Page 43

Operation

Mastercycler

nexus

English (EN)

5.5.1.2 Creating a new program

You can create programs in the navigation tree on the user node level or on the folder level.

1. In the navigation tree, mark the user node or folder where you want to create the new program.

2. Press the

New

softkey.

3. Enter the program name in the

Name:

field. The maximum number of characters is 21.

4. Select a program template in the

Use template:

field.

An overview of the available program templates can be found separately (see p. 58). If you do not want
to use a template, select

none

5. Optional: enter a comment for the new program in the

Comment

field.

6. Press the

softkey.

The new program opens in the program editor. You can now configure and save the program (see p. 49).

You can change the program properties at a later time. To do so, mark the program in the
navigation tree and press the

Prop.

softkey. The following properties can be changed:

• Program name
• Comment for the program
• Read/write access rights for the program