Brother FAX 255 - Manual (Page 33)

19
O N - S C R E E N P R O G R A M M I N G
Function Selection Table
If you have a basic understanding of how to program your fax machine, you
can perform most of the programming settings without the Owner’s Manual.
To help you understand the function selections, options, and settings that
are found in your fax programs, use the Function Selection Table below.
2. SETUP RECEIVE
Function Description Factory Set Page
1. RING DELAY Number of rings before fax RING DELAY: 04 30
machine answers in FAX/TEL or
FAX modes.
2. F/T RING TIME Sets the time for “double ring” in 20 31
FAX/TEL mode.
3. EASY RECEIVE Receive fax messages without O N 31
pressing the Start key.
4. REMOTE CODE Enter code to activate or deactivate ON ( 51, #51) 33
machine from a remote location.
5. POLLING RX Sets up your fax machine to poll OFF 34
another fax machine.
1. INITIAL SETUP
Function Description Factory Set Page
1. TONE/PULSE Selects dialing mode. TONE 23
2. DATE/TIME Enter date and time for LCD 2000 1/1 00:00 23
display and to print on
transmissions.
3. STATION ID Program name, fax number to — 24
appear on each transmitted page.
4. BEEPER Adjust volume level of beeper. LOW 27
5. VOLUME AMPLIFY For the hearing-impaired, you OFF 27
can set the volume to
AMPLIFY:ON, on either a
permanent or temporary basis.