Advance Adapters 716400 User Manual
Yoke removal trail tool
![background image](/manuals/551002/1/background.png)
ADVANCE ADAPTERS, INC. P/N: 716400
P.O. BOX 247, 4320 Aerotech Center Way
Paso
Robles,
CA
93447
PAGE
1
OF
2
Telephone: (800) 350-2223
Fax: (805) 238-4201
Page Rev. Date:
10-03-13
SPECIAL NOTE:
The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the compo-
nents will void any possible warranty or return privileges. If you do not fully understand modifications or changed that will be required to complete your conversion,
we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter
components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment.
These manual are normally available at automotive dealerships and parts stores.
KIT CONSISTS OF:
No. Qty. Part No.
Description
1.
1
716401
PLATE- YOKE REMOVAL TOOL
2.
1
716402
BOLT- CENTERING FOR YOKE PULLER 3/4-16
3.
2
722533
BOLT-1/4" X 28 X 1 1/2" H.H.C.S. GRADE 5Z
4.
4
722523
1/4" USS FLAT WASHER PLTD.
5.
4
723131
5/16"-24 HEX JAM NUT zinc
6.
2
723133
5/16"-24 X 3" ALLTHREAD GRADE 8
For removal of:
•
Differential pinion yokes
•
Transfer case yokes
Fits yoke types: CV, Non CV, & companion yoke series:
Yoke removal instructions:
This kit is supplied with all the necessary hardware to remove your yoke.
Hardware used when removing all yokes except 1310 Non CV style (see photo A)
•
1 – 716402
•
4 – 722523
•
4 – 722131
•
2 – 723133
Hardware used when removing 1310 Non CV yoke (see photo B)
•
1 -716402
•
2 – 722533
•
2 -722523
Once you have selected the proper hardware to assemble to your yoke with a 1 1/8” socket or
end wrench rotate the center bolt clockwise.
Yoke Removal Trail Tool