Advance Adapters 717004-NP - Manual

ADVANCE ADAPTERS INC. P/N: 717004 or
P.O. Box 247, 4320 Aerotech Center Way
P/N: 717004-NP
Paso Robles, CA 93447 PAGE 1 OF 1
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 09-28-10
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a
service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive
dealerships and parts stores.
KIT CONSISTS OF:
No.
Qty. Part No. Description
INSTALLATION PROCEDURES: These headers are designed to fit on the outside of the frame rails. They may require
some modifications to the to the stock fender wells for proper fit. These headers are designed to fit a standard Ford small block
head and the header bolts should be torqued to the Ford specifications. Due to the welding process, the header flange will
sometimes warp slightly. To straighten the header and seal it to the head surface, we recommend bolting the header to the head
starting with the center bolts and working outward until all bolts are tight.
The header warranty is void if modified or any type of header wrap tape is used.
FORD V8 TO JEEP UNIVERSAL
SQUARE FENDER HEADERS
1. 1 717004L FORD V8 FENDER WELL HEADER LEFT
2. 1 717004R FORD V8 FENDER WELL HEADER RIGHT
3. 2 716552 GASKET - FORD V8
4. 2 716562 2-1/2" COLLECTOR GASKET
5. 2 717513 2-1/2" COLLECTOR RING
6. 1 723799 HEADER BOLT PACK
7. 4 723707 3/8"-16 x 1" HEADER BOLTS
717004L 717004R
Spark plug clearance and plug wire clearance can be
an issue on some headers. If you find a clearance
issue you can switch your spark plugs out to a header
spark plug. These are shorter spark plugs which will
normally allow for better boot clearance. These plugs
are on average 1/2" shorter than a standard spark
plug. The plug on the right is a header spark plug.