Advance Adapters 716055 User Manual
Crossmember kit
SPECIAL NOTE:
The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components
will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly
recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We
recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally
available at automotive dealerships and parts stores.
ADVANCE ADAPTERS INC.
P/N: 716055
P.O. Box 247, 4320 Aerotech Center Way
New Kit: (10/03)
Paso Robles, CA 93447
PAGE 1 OF 1
Telephone: (800) 350-2223
Fax: (805) 238-4201
Page Rev. Date:
08-09-10
KIT CONSISTS OF:
No.
Qty
Part No.
Description
1.
1
716055A
ADAPTER MOUNT
2.
1
716055B
CROSSMEMBER MOUNT
3.
2
716055C
URETHANE BUSHING
4.
1
716055D
BOLT BUSHING
5.
1
725022
1/2"-13 x 7.5" H.H.C.S.
6.
1
725005
1/2"-13 NYLON LOCKNUT
7.
2
724307
7/16"-14 x 1" H.H.C.S.
8.
2
724302
7/16" FLAT WASHER
This crossmember is designed to originally to fit our Powerglide adapter, P/N 50-9200. We now use it on several of our
adapter kits. Some stock transfer case linkages may interfere with one set of mounting holes on this support, if this is
true on your application you may be required to cut a section on the mount off like shown below.
CROSSMEMBER KIT