Advance Adapters 713098 - Manual (Page 3)

ADVANCE ADAPTERS INC. P/N 713098
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE 3 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 06-22-09
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion,
we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter
components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment.
These manuals are normally available at automotive dealerships and parts stores.
HEMI V8
TJ WRANGLER MOTOR MOUNTS
Power Steering:
The Jeep and the HEMI blocks should have matching fittings. In most cases, the stock Dodge pressure line can be
rerouted to work on the Jeep box. The low pressure return line could be any approved oil hose since it sees only minimal
line pressure. The low pressure hose should always be secured with hose clamps. Make sure the hoses have clearance
in the routing to avoid rubbing on anything. Fill the pump reservoir with fluid and replace the cap when all connections
are secure.
Exhaust:
The stock manifolds from a Grand Cherokee are required for the Hemi to fit in the Jeep TJ’s, we carry these manifolds
under part number 716601.
Wire Harness:
Hotwire (Squire Inc.) is who we recommend on the harness for the Jeeps. You would need to send your Hemi harness
along with the stock Jeep harness. They build a new harness from these two systems. The PCM should be a 05/06 truck
unit which they can re-flash. If you don’t have the correct PCM they can provide a new one.
Radiator:
We offer a new aluminum radiator for the Hemi conversions, P/N 716688-AA for auto transmissions and P/N 716688-AB
for manual transmissions. The electric puller fan works great on these radiators, or you can use a mechanically-driven
fan from a 4.7 Durango.
Fuel System:
The stock tank from 2005 & 2006 can be retained without any modifications. Jeeps 1997 to 2004 will require a late model
fuel tank or you can use an upgraded fuel tank from GEN-Right. This is a 19 gallon tank that fits the TJ without any
modifications, P/N GST-2002-2. You will also need a few additional Chrysler part numbers: Fuel pump 05161335AB,
o-ring 55366298AA, and locking ring 55366299AA. These item are available from Advance Adapters.