Advance Adapters 713087 - Manual (Page 3)

ADVANCE ADAPTERS INC. P/N: 713087
P.O. Box 247, 4320 Aerotech Center Way New Item: (2/99)
Paso Robles, CA 93447 PAGE 3 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 03-17-09
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components
will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly
recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components.
We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals
are normally available at automotive dealerships and parts stores.
CHEVY V8 SADDLE MOUNT
1987-96 YJ WRANGLERS
The LT1 engine can be used with the bolt in YJ mount as long as you replace the A/C pump with the Chevy P/N
10115875. This is a replacement pulley for the LT1 that removes the A/C pump. The replacement pulley is slightly smaller
in diameter and will require a new belt.
The P/N 713087 mount is designed around a stock Jeep front axle. The photo above shows the mount with a Jeep that
has a custom axle installed. The interference is due to the size of the axle housing and the lift that is installed. The axle
is installed under the springs, a spring over on this axle would provide ample clearance for the mount. This is just an
example of a potential interference problem.