Advance Adapters 715630 - Manual

ADVANCE ADAPTERS INC. P/N: 715630
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE 1 OF 2
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 07-18-02
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components
will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly
recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components.
We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are
normally available at automotive dealerships and parts stores.
KIT CONSISTS OF:
No. Qty Part No. Description
1. 3 715649 BUTTONS
2. 6 715650 NYLON BUSHINGS
3. 3 715651 CLIPS
4. 1 715653 LEVER
5. 1 715661 ROD
6. 1 715662 ROD
7. 1 715663 ROD
8. 1 715670 LEVER
9. 1 715678 LEVER
10. 3 303115 E-CLIP RETAINER
V
PART NO.
71564
PART NO.
715644
BAGGED HARDWARE
PART NO. 715646
PART NO.
715647
PART NO. 715662
PART NO. 715661
P/N 715678
(1st & 2nd Gear)
PART NO. 715663
P.N. 715670
(REVERSE)
SHIFTER LINKAGE ROD & LEVER KIT
FOR EARLY BRONCO T&C TRANSMISSION
TYPICAL HURST SHIFTER
PART NO. 715600