Advance Adapters 7169380 - Manual (Page 2)

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion,
we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter
components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment.
These manuals are normally available at automotive dealerships and parts stores.
ADVANCE ADAPTERS INC. P/N: 716938
P.O. Box 247, 4320 Aerotech Center Way New Item: (03/11)
Paso Robles, CA 93447 PAGE 2 OF 2
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 03-21-11
FJ60/62 34 & 38 MM CLUSTER PIN 4:1 GEAR SET
Lower two bosses that need to modified for the cluster gear.
The photos show the case at different angles with the modification to fit
the new gear set. Notice the two bosses for the cluster gear only need
to be 1.30" down from the case half surface, while the low speed gears need
the modification down to the bottom of the inner case.
We can modify the case for you here at Advance Adapters for
$325.00. The case must be clean and the tailhousing must
be removed. Additional charges may apply for dirty cases.