Advance Adapters 50-8811 User Manual
Page 2

ADVANCE ADAPTERS INC.
P/N: 50-8811
P.O. Box 247, 4320 Aerotech Center Way
New Item: (01/03)
Paso Robles, CA 93447
PAGE 2 OF 3
Telephone: (800) 350-2223
Fax: (805) 238-4201
Page Rev. Date: 12/09/13
SPECIAL NOTE:
The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion,
we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter
components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment.
These manuals are normally available at automotive dealerships and parts stores.
DANA 300
TO NP203 LOW GEAR BOX
The existing NP203 retainer is used. The new shaft
replaces the existing NP203 shaft in the low gear box.
(photo shows early 10 spline shaft)
r
r
Tab must be removed
for retainer to fit into
adapter.
After tab removed.
(photo shows early 10 spline shaft)