Advance Adapters 50-0231 - Manual (Page 3)

ADVANCE ADAPTERS INC. P/N: 50-0231
P.O. Box 247, 4320 Aerotech Center Way New Item: (10/02)
Paso Robles, CA 93447 PAGE 3 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 12-10-02
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components
will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly
recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We
recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally
available at automotive dealerships and parts stores.
29 SPL. NP231 TRANSFER CASE INPUT GEAR
DODGE NV4500 29 SPL. TRANSMISSIONS
The best way to allow for the installation of this early style gear into both applications is to supply
a new wide style bearing with the gear. The stock front bearing should be removed and
discarded. This new bearing needs to be installed
and used for all applications. Once the new bearing
is installed, reassemble the transfer case. Consult
a service manual for torque specifications.
Note: The only two parts you should have left out
of the case is the old input gear and the old input
bearing.
During reassembly, make sure the oil return hole
matches the front retainer hole.