Advance Adapters 7160050 - Manual

ADVANCE ADAPTERS INC. P/N: 716005
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE 1 OF 2
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Page: 06-18-08
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void
any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that
you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service
manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships
and parts stores.
KIT CONSISTS OF:
No.
Qty Part No. Description
+0000
-.0005 1.980 DIA.
(Both Ends)
1.250" or 1.125"
SHAFT
"O"-RING
TRANSFER CASE
BEARING
CUP
GEAR
CUP
NUT
WASHER
BUSHING
"O"-RING
BEARING
.485 -.005
+
LUBRICATE "O"-RING TO
PREVENT DAMAGE
1-1/4" JEEP DANA 18/20 & BRONCO 20
TRANSFER CASE INTERMEDIATE GEAR KIT
1. 1 716028 SHAFT
2. 1 716029 BUSHING
3. 2 716304 BEARING CUPS
4. 2 716305 BEARING CONES
5. 1 716708 "O"-RING
6. 1 716710 "O"-RING
7. 1 720005 PIN
8. 1 725605 WASHER
9. 1 726201 NUT