Advance Adapters 27-0021T - Manual

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion,
we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter
components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment.
These manuals are normally available at automotive dealerships and parts stores.
KIT CONSISTS OF:
No. Qty Part No. Description
ADVANCE ADAPTERS INC. P/N: 27-0021T
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE 1 OF 1
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 10-30-02
TOY. L/C 16 SPL./GM V8 TRANNY KIT
DODGE 29 SPLINE NV4500
1. 1 Kit 50-0223 DODGE 29 SPL. / TOY. L.C. 16 SPL.
2. 1 52-0221 NV4500 GM INPUT SHAFT 1-1/8"
3. 1 Kit 712576 NV4500-1996 GM BHSG ADAPT. KIT
4. 1 Kit 716050D1 NV4500 SHIFTER HANDLE ASSY.
5. 1 Kit 716288 TOY. L/C SLAVE CYL. BRKT. NV4500
6. 1 Kit 716316 T/O BEARING ASSY. L/C 3SP
INSTALLATION NOTES:
This kit is designed to fit the Dodge Standard Duty 29 spline NV4500 transmission.
The front bearing retainer must be removed with the stock input shaft. Install the new GM style input shaft provided. The
bearing retainer must be modified as listed on the 712576 Instruction Sheet.
Remove the stock tailhousing and install the new adapter housing provided in this kit. Refer to the 50-0226 Instruction
Sheet.
This is a parts pull sheet. Refer to the instruction sheet on each kit for proper installation.