Advance Adapters AS-6800 - Manual

KIT CONSISTS OF:
No. Qty Part No. Description
ADVANCE ADAPTERS INC. P/N: AS-6800
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE 1 OF 1
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 01-23-12
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a
service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive
dealerships and parts stores.
1. 1 51-6800 CASTING (Ref: 711168)
2. 1 716511 O-RING
3. 4 723729 S.H.C.S. 3/8"-16 x 1-3/4" LONG
4. 4 720046 S.H.C.S. 10mm-1.5 X 40mm LONG
5. 2 723730 S.H.C.S. 3/8"-16 X 1-1/4"
GM TH350 OR 700R AUTOMATIC TO
ATLAS TRANSFER CASE
This casting couples a TH350 or 700R to an Atlas transfer case. These transmissions used two different
thread sizes when bolting the adapter to the transmission. The TH350 used a standard 3/8"-16 thread size
and most 700Rs used metric. Both bolt sets have been provided for you.
Two rotations are provided on the casting. Choose the rotation that best suits your application.
Two of the positions on the rotation will require removal of two studs from the transfer case and substitution by the two 3/8"-16
x 1-1/4" Socket Head Cap Screws. This is due to lack of wrench clearance around the casting.
Use silicone sealant on both sides of the transfer case gasket. Use Loctite on all bolts.