Advance Adapters AS-0404 - Manual

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific types of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand the modifications or changes that will be required to complete
your conversion, we strongly recommend that you contact our sales department for more information. This Instruction Sheet is only to be used for the assembly
of Advance Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque vales, wiring diagrams and
other related equipment. These manuals are normally available at automotive dealerships and parts stores.
ADVANCE ADAPTERS, INC. P/N: AS-0404
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE: 1 OF 1
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 12-11-12
KIT CONSISTS OF:
No.
Qty. Part No. Description
ATLAS SPACER ADAPTER
1. 1 51-0404 ADAPTER RING
2. 6 723701 3/8"-16 HEX NUT
3. 6 723704 LOCK WASHER
4. 6 723712 STUD BOLT 3/8"-16 x 3-1/2" LG.
This 1" spacer adapter is used when a transmission shaft is to long or the transfer case input is to shallow. The spacer
has a stock Jeep or Ford circular bolt pattern. This bolt pattern is not symetrical and will only line up with your
transfer case or adapter in one rotation. So you must rotate the spacer until all of the holes line up. Since the 6 holes
are "through holes", we have provided new stud bolts, nuts, and lockwashers. These fasteners should be installed
with Loctite.
Note: This spacer has a casting number of 51-0209.