Advance Adapters 50-8902 - Manual (Page 4)

ADVANCE ADAPTERS INC. P/N: 50-8902
P.O. Box 247, 4320 Aerotech Center Way Old Part No: 711089-16
Paso Robles, CA 93447 PAGE 4 OF 4
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 07-26-00
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that
a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at
automotive dealerships and parts stores.
P/N 715521-BLK Installation Instructions:
The difference between the 3 and 4 speed linkage is exactly 2". The linkage gate will need to be welded or bolted
to the our bracket. It is best to assemble this bracket and control linkage prior to the assembly into the vehicle. You
must make sure that the linkage is in the same relative location to the transfer case as it was on the original
transmission. Any variation to the location could possibly cause the transfer case to jump out of gear.
GM 700R-4 AUTOMATIC OVERDRIVE TO
LAND CRUISERS 1974-AUGUST 1980 (4 SPEED)