Advance Adapters 50-8403 User Manual
Page 3
A.O.D.
INTERCHANGEABILITY
When using this output shaft to service 1983-87 transmission models, rework the governor
assembly using the supplied valve and spring assembly kits.
Identify the governor being reworked and select the proper governor valve and spring kit from
the information below.
VALVE & SPRING DIAGRAM
ASSY. KITS
(See below)
SPRING COLOR CODE
VALVE I.D.
E7SP-7G495-DA
A
YELLOW
.250 DIA.
E7SP-7G495-CA
A
NONE
.250 DIA.
E7SP-7G495-AA
B
NONE
.175 DIA. STEP.
For disassembly and assembly of governor, see Volume D, Section 17-20 of the appropri-
ate Car Shop Manual or Volume A, Section 17-20 of the appropriate Truck Shop Manual.
To service 1982 and prior models, use new Governor Assy. (-7C063).
DIAGRAM A
DIAGRAM B
STEP
FORD AOD AUTOMATIC TRANSMISSION INFORMATION
USING THE NEW STYLE SHAFT 1988-89:
If you elect to update your AOD output shaft to the newer design that has the additional hole, you must change the
valve and spring assembly. We have listed the three different valve and spring assembly part numbers that
correspond to the various governor assembly sizes. The information listed below is a direct reprint from the Ford
notice concerning AOD Governor Interchangeability.
ADVANCE ADAPTERS INC.
P/N: 50-8403
P.O. Box 247, 4320 Aerotech Center Way
New Item: (3/93)
Paso Robles, CA 93447
PAGE 3 OF 3
Telephone: (800) 350-2223
Fax: (805) 238-4201
Page Rev. Date:
10-05-99
FORD AOD 4 SPEED OVERDRIVE AUTOMATIC
TO BORG WARNER BRONCO & RANGER T/C