Advance Adapters 50-7101 - Manual

ADVANCE ADAPTERS INC. P/N: 50-7101
P.O. Box 247, 4320 Aerotech Center Way Old Part No: 711071-23
Paso Robles, CA 93447 PAGE 1 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 02-15-99
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a
service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive
dealerships and parts stores.
KIT CONSISTS OF:
No. Qty Part No. Description
1. 1 51-6300 ADAPTER CASTING (Ref: 711163)
2. 1 51-8500 ADAPTER PLATE
3. 1 52-7100 OUTPUT SHAFT (Ref: 711371-23)
4. 1 716062 NYLON BUSHING FOR T350 OUTPUT SHAFT (CUSTOMER MUST INSTALL)
5. 2 716511 SEAL ("O"-RING)
6. 1 716517 GASKET
7. 5 723701 HEX NUT 3/8"-16
8. 5 723704 3/8" LOCK WASHER
9. 1 723711 STUD BOLT 3/8"-16 x 2" LG
10. 4 723712 STUD BOLT 3/8"-16 x 3-1/2" LG
11. 5 723723 H.H.C.S. 3/8"-16 x 1-1/2" LG
GM TURBO 350 TO JEEP NEW PROCESS
208 TRANSFER CASES