Advance Adapters 50-6907 - Manual

KIT CONSISTS OF:
No. Qty Part No. Description
ADVANCE ADAPTERS INC. P/N: 50-6907
P.O. Box 247, 4320 Aerotech Center Way New Item: (11/93)
Paso Robles, CA 93447 PAGE 1 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 02-01-12
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete
your conversion, we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly
of Advance Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams
and other related equipment. These manuals are normally available at automotive dealerships and parts stores.
1. 1 51-0600 ADAPTER CASTING (Ref: 711106)
2. 1 51-6901 ADAPTER PLATE (Ref: 711169-400)
3. 1 52-1301 SPUD SHAFT (23-Splines) (Ref: 711313-23)
4. 1 716001 T86 BEARING RETAINER WITH SNAP RING
5. 1 716302 SEALED BEARING
6. 1 716308 BEARING (#6209)
7. 1 716450 SNAP RING (GM #378-5205)
8. 1 716510 GASKET (GM #862-4709)
9. 1 716511 "O" RING GASKET
10. 1 716568 GASKET
11. 1 716707 SEAL (NAT. #472144)
12. 4 720046 SPECIAL METRIC CAP SCREW
13. 6 723701 NUT 3/8"-16 PLATED GRD 5
14. 6 723704 3/8" LOCK WASHERS
15. 6 723711 STUD BOLT 3/8"-16 X 2" LG
16. 1 728701 NYLON LOCK NUT
17. 1 JP001 JEEP INSTRUCTION MANUAL
GM 700R-4 TO SCOUT DANA 300 T/C