Advance Adapters 50-6802 - Manual

KIT CONSISTS OF:
No. Qty Part No. Description
ADVANCE ADAPTERS INC. P/N: 50-6802
P.O. Box 247, 4320 Aerotech Center Way Old Part No: 711068-23
Paso Robles, CA 93447 PAGE 1 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 03-07-00
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that
a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at
automotive dealerships and parts stores.
1. 1 51-6800 CASTING (Ref: 711168)
2. 1 52-6801 TH350 SHAFT (23-SPLINES) (Ref: 711368-23)
3. 1 716062 NYLON BUSHING FOR T350 OUTPUT SHAFT (CUSTOMER MUST INSTALL)
4. 1 716511 O-RING
5. 1 716517 GASKET, NP208 T/C
6. 1 716729 NAT. SEAL #456057 (ADAPTER)
7. 3 723704 3/8" LOCKWASHERS
8. 1 723721 H.H.C.S. 3/8"-16 x 1" LONG
9. 4 723729 S.H.C.S. 3/8"-16 x 1-3/4" LONG
10. 2 723730 S.H.C.S. 3/8"-16 x 1-1/4" LONG
11. 1 JP001 JEEP INSTRUCTION MANUAL
GM TH350 AUTOMATIC TO NP231
TRANSFER CASE (23-SPLINES)
INSTALLATION NOTE:
This adapter kit should be used primarily for replacement of the AX15 5 speed Wrangler transmissions. The output shaft
for the transmission will have 23 splines and protrude approximately 7/16" beyond the face of the adapter. This adapter
is not compatible with Jeep vehicles 1980-86 that were equipped with the Dana 300 transfer case.