Advance Adapters 50-6600 - Manual

ADVANCE ADAPTERS INC. P/N: 50-6600
P.O. Box 247, 4320 Aerotech Center Way Old Part No: 711066
Paso Robles, CA 93447 PAGE 1 OF 5
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 08-13-14
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a
service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive
dealerships and parts stores.
KIT CONSISTS OF:
No. Qty Part No. Description
1. 1 51-7500 ADAPTER CASTING (Ref: 711175)
2. 1 52-7900 27SP T19 OUTPUT SHAFT
3. 1 716202 NP231 INPUT SHAFT
4. 1 716325A NEEDLE BEARING NP231 GEAR
5. 1 716452 SNAP RING/ JEEP
6. 1 716512 GASKET (NP435, T18)
7. 1 716517 GASKET NP208 T/C
8. 1 716760 NP231 INPUT SEAL
9. 4 725029 1/2"-13 x 1-1/4" H.H.C.S.
FORD T19 4-SPEED TRANS. TO JEEP NP231 T/C
21 SPL. upgrading to a 87-94 27 SPL.