Advance Adapters 50-6401 User Manual
Page 3

ADVANCE ADAPTERS INC.
P/N: 50-6401
P.O. Box 247, 4320 Aerotech Center Way
Old Part No: 711064-21
Paso Robles, CA 93447
PAGE 3 OF 3
Telephone: (800) 350-2223
Fax: (805) 238-4201
Page Rev. Date:
12-08-00
SPECIAL NOTE:
The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete
your conversion, we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly
of Advance Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams
and other related equipment. These manuals are normally available at automotive dealerships and parts stores.
GM TH 400 AUTOMATIC TO JEEP
NEW PROCESS - 21 SPLINE T/C
NOTES:
1. If your input sleeve is the longer style that protrudes 2.125", you must remove this portion with an abrasive cut off
saw to the 1.500" length. This is due to the length of the splines on the new shaft.