Advance Adapters 50-6303 - Manual

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific types of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand the modifications or changes that will be required to complete
your conversion, we strongly recommend that you contact our sales department for more information. This Instruction Sheet is only to be used for the assembly
of Advance Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque vales, wiring diagrams and
other related equipment. These manuals are normally available at automotive dealerships and parts stores.
ADVANCE ADAPTERS, INC. P/N: 50-6303
P.O. Box 247, 4320 Aerotech Center Way Old Part No: 711063-700
Paso Robles, CA 93447 PAGE: 1 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 03-13-01
OPTIONAL ITEMS:
Qty.
Part No. Description
KIT CONSISTS OF:
No.
Qty. Part No. Description
GM 700R-4 AUTOMATIC TO
JEEP DANA 300 TRANSFER CASE
1. 1 51-6300 CASTING (Ref: 711163) (Assembled by AA)
2. 1 52-6302 SPUD SHAFT (Ref: 711363) (Assembled by AA)
3. 1 52-6900 SHAFT (Ref: 711369)
4. 1 716082 700R WASHER
5. 1 716308 BEARING (#6209) (Assembled by AA)
6. 1 716450 SNAP RING (Assembled by AA)
7. 1 716456 SNAP RING (Assembled by AA)
8. 1 716511 "O"-RING
9. 1 716517 GASKET
10. 4 720038 10mm LOCK WASHERS
11. 4 720046 10mm 1.5 THREAD BOLT S.H.C.S.
12. 6 723701 3/8"-16 HEX NUT
13. 6 723704 LOCK WASHER
14. 6 723711 STUD BOLT 3/8"-16 X 2" LG.
15. 1 JP001 JEEP INSTRUCTION MANUAL
1 716021 CROSSMEMBER
MOUNT