Advance Adapters 50-5706 - Manual

KIT CONSISTS OF:
No.
Qty. Part No. Description
ADVANCE ADAPTERS, INC. P/N: 50-5706
P.O. BOX 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE 1 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 06-21-02
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modifications or changed that will be required to complete your
conversion, we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance
Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related
equipment. These manual are normally available at automotive dealerships and parts stores.
GM 700R-4 AUTOMATIC TO
TOYOTA TRUCK 1986-87 (23 SPLINES)
1. 1 51-4000 ADAPTER CASTING (Ref: 711140) (Assembled by AA)
2. 1 52-6201 COUPLER (27 X 23 Splines) (Ref: 711362-23) (Assembled by AA)
3. 1 52-6900 SHAFT (Ref: 711369)
4. 1 716063 COVER PLATE
5. 1 716082 700R PLASTIC WASHER
6. 1 716289 SEAL SLEEVE (INSTALLED)
7. 1 716308 BEARING (#6209) (Assembled by AA)
8. 1 716450 SNAP RING (GM #378-5205) (Assembled by AA)
9. 1 716456 SNAP RING (T/A #N5000-334) (Assembled by AA)
10. 1 716511 "O"-RING (GM #135-8899)
11. 1 716563 GASKET
12. 1 716564 GASKET
13. 1 716712 SEAL (NAT #223440) (Installed in Casting by AA)
14. 4 720040 8mm X 1.25 X 20mm (Metrics)
15. 4 720046 METRIC S.H.C.S. 10mm-1.5 THR X 40mm
16. 1 TT001 TOYOTA TRUCK INSTRUCTION MANUAL
ADVANCE ADAPTERS
IN-HOUSE PROCEDURES
NOTE:
P/N 716289 must be installed and
loctited in place. Use Loctite 680.
Install seal before shipping