Advance Adapters 50-5702 - Manual (Page 3)

GM TH350 AUTOMATIC TRANS TO
TOYOTA 4WD TRUCK 1979-95 (21-SPLINES)
ADVANCE ADAPTERS INC. P/N: 50-5702
P.O. Box 247, 4320 Aerotech Center Way Old Part No: 711057-LS
Paso Robles, CA 93447 PAGE 3 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 01-16-12
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that
a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at
automotive dealerships and parts stores.
rods from a 1984-88 (Carbureted 4 cyl.) transfer case or using Toyota part numbers 36314-35020 (high-low rod) and
36313-35020 (front drive rod), you will be able to retain your stock transfer case. The other option is to purchase a 1984-
88 (Carbureted 4 cyl.) transfer case.
Make sure the bearing retainer clip found on the front side of some transfer cases is removed prior to assembly of the
new adapter. This clip was used to retain lower bearing in Toyota transfer case. This adapter kit must be used in
conjunction with a GM TH350 4WD output shaft, GM Part No. 8641088.