Advance Adapters 50-4705 - Manual

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific types of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand the modifications or changes that will be required to complete
your conversion, we strongly recommend that you contact our sales department for more information. This Instruction Sheet is only to be used for the assembly
of Advance Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque vales, wiring diagrams and
other related equipment. These manuals are normally available at automotive dealerships and parts stores.
ADVANCE ADAPTERS, INC. P/N: 50-4705
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE: 1 OF 1
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 12-30-08
IN HOUSE INSTRUCTIONS
No.
Qty. Part No. Description
GM SM465 TO NP208
STOCK ADAPTER
1. 1 51-4705 GM SM465 X NP208
2. 1 716515 SM465 GASKET
3. 2 723701 3/8-16 NUT
4. 14 723704 3/8" LOCKWASHER
5. 2 723711 3/8"-16 X 2.0" STUD BOLT
6. 12 723723 3/8"-16 x 1-1/2" H.H.C.S.
This casting is a replacement for the stock SM465 to NP208 adapter. This casting is 8-1/2" long and utilizes the short
style crossmember foot.
This casting can be used for a NP205 transfer case, but requires some modifications. Clearance for the shift rail on the
NP205 and a pivot for the linkage must be fabricated.
NP205 that had a long transfer case input gear used a longer adapter housing approximately 10" long. These applications
we can add a 1.625" spacer P/N 51-6910. This spacer has the clearance notch for the NP205 shift rail. The added length
makes the adapter housing close to the same overall length.