Advance Adapters 50-4400 - Manual

ADVANCE ADAPTERS INC. P/N: 50-4400
P.O. Box 247, 4320 Aerotech Center Way Old Part No: 711044
Paso Robles, CA 93447 PAGE 1 OF 2
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 04-17-01
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a
service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive
dealerships and parts stores.
KIT CONSISTS OF:
No.
Qty Part No. Description
1. 1 51-4300 ADAPTER HOUSING (Ref: 711143) (Assembled by AA)
2. 1 52-6200 COUPLER (27 X 21) (Ref: 711362) (Assembled by AA)
3. 1 52-8200 C4 TRANS SHAFT-27 TOOTH (Ref: 711382)
4. 1 716061 VENT PLUG
5. 1 716063 COVER PLATE
6. 1 716308 BEARING (Assembled by AA)
7. 1 716450 SNAP RING (GM #3785205) (Assembled by AA)
8. 1 716563 GASKET
9. 1 716564 GASKET FOR TOYOTA T/C
10. 1 716734 SEAL (NAT# 471833) (Assembled by AA)
11. 4 720040 METRIC BOLTS 8mm X 1.25 X 20mm
12. 1 TT001 TOYOTA TRUCK INSTRUCTION MANUAL
NOTE: Please verify the shaft output spline is 27 spline, before installing into your transmission.
FORD C4 AUTOMATIC TRANS TO
TOYOTA 4WD TRUCK 1979-87 (21 Spline)
ADVANCE ADAPTERS
IN-HOUSE PROCEDURES
NOTE: Shaft 52-8200 must
be shortened .375".