Advance Adapters 50-2900 - Manual

ADVANCE ADAPTERS INC. P/N: 50-2900
P.O. Box 247, 4320 Aerotech Center Way Old Part No: 711029
Paso Robles, CA 93447 PAGE 1 OF 2
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 08-07-08
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a
service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive
dealerships and parts stores.
KIT CONSISTS OF:
No.
Qty Part No. Description
OPTIONAL ITEMS:
Qty
Part No. Description
NOTE: The seal in this kit was changed on 02-25-99 to a larger I.D. The old seal number was 716705 (455308).
C4 CASE LENGTH 11.187"
FORD C4 3SPEED AUTOMATIC TO
JEEP & SCOUT TRANSFER CASES
1 716003 CROSSMEMBER MT
1 716001 or
716002
T86/T90 BRG. RET.
1 716302 SEALED BEARING
1. 1 51-1600 CASTING (Ref: 711116)
2. 1 52-2900 SHAFT (Ref: 711329)
3. 1 716061 VENT PLUG
4. 1 716568 GASKET
5. 1 716752 SEAL
6. 1 723701 3/8"-16 HEX NUT
7. 1 723710 3/8"-16 x 2-3/4" STUD BOLT
8. 2 723729 3/8-16 X 1-3/4 SHCS
9. 4 723740 3/8-16 X 1-1/2 SHCS
10. 1 728701 7/8"-16 NYLON LOCK NUT
11. 1 JP001 JEEP INSTRUCTION MANUAL