Advance Adapters 50-2704 - Manual (Page 4)

A.O.D.
INTERCHANGEABILITY
When using this output shaft to service 1983-87 transmission models, rework the governor
assembly using the supplied valve and spring assembly kits.
Identify the governor being reworked and select the proper governor valve and spring kit from
the information below.
VALVE & SPRING DIAGRAM
ASSY. KITS (See below) SPRING COLOR CODE VALVE I.D.
E7SP-7G495-DA A YELLOW .250 DIA.
E7SP-7G495-CA A NONE .250 DIA.
E7SP-7G495-AA B NONE .175 DIA. STEP.
For disassembly and assembly of governor, see Volume D, Section 17-20 of the appropri-
ate Car Shop Manual or Volume A, Section 17-20 of the appropriate Truck Shop Manual.
To service 1982 and prior models, use new Governor Assy. (-7C063).
DIAGRAM A
DIAGRAM B
STEP
FORD AOD AUTOMATIC TRANSMISSION INFORMATION
USING THE NEW STYLE SHAFT 1988-89:
Update your AOD output shaft to the newer design that has the additional hole, you must change the valve and spring
assembly. We have listed the three different valve and spring assembly part numbers that correspond to the various
governor assembly sizes. The information listed below is a direct reprint from the Ford notice concerning AOD
Governor Interchangeability.
ADVANCE ADAPTERS INC. P/N: 50-2704
P.O. Box 247, 4320 Aerotech Center Way New Item: (3/93)
Paso Robles, CA 93447 PAGE 4 OF 4
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 10-05-99
LATE MODEL 4 SPEED AUTOMATIC OD FOR
BRONCO DANA 20 TRANSFER CASE 1966-76