Advance Adapters 50-2501 - Manual

KIT CONSISTS OF:
No. Qty Part No. Description
ADVANCE ADAPTERS INC. P/N: 50-2501
P.O. Box 247, 4320 Aerotech Center Way New Item: (10/96)
Paso Robles, CA 93447 PAGE 1 OF 1
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 02-20-03
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components
will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly
recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We
recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally
available at automotive dealerships and parts stores.
1. 1 51-6902 ADAPTER PLATE 700R TO TH400 (Rotated pattern)
2. 1 52-2501 700R-4 TO QUADRA TRAC SPUD SHAFT
3. 1 716307 SPEC. BRG. 308 O.D. TO 307 I.D.
4. 1 716453 SNAP RING
5. 1 716510 GM T400 862-4709 GASKET
6. 1 716511 TURBO 350 "O" RING
7. 4 720046 10mm-1.5 THREAD TO 40mm S.H.C.S.
8. 6 723704 LOCK WASHER 3/8" PLATED
9. 6 723722 H.H.C.S. 3/8"-16 X 1-1/4" (GRADE 5)
10. 1 761093A SNAP RING/308 BEARING
700R-4 TO QUADRA-TRAC TRANSFER CASE
NOTE: If your Quadra-Trac is
equipped with C.V. joints, there may
be interference with the oil pan. Switch
joints to Non-C.V. style.