Advance Adapters 50-1500 - Manual (Page 3)

TURBO 400 TO
TOYOTA LAND CRUISER 1963-73 (3-SPEED)
ADVANCE ADAPTERS INC. ` P/N: 50-1500
P.O. Box 247, 4320 Aerotech Center Way Old Part No: 711015
Paso Robles, CA 93447 PAGE 3 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 12-11-00
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components
will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly
recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We
recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally
available at automotive dealerships and parts stores.
CAUTION! If an open non-sealed bearing is used then you
must remove seal in the Transfer Case for oil
supply to bearing.
We recommend that Loctite be used on all bolts. We have included a new nut and flat washer for use on the end of the
output shaft. This 7/8"-16 special nylon lock nut is available through most Jeep stores. You should never reuse the nylon
lock nut in order to maintain the gears in their secure position.
Refer to the Land Cruiser Instruction Manual for additional information concerning the transfer case control linkage.