Advance Adapters 50-0500 - Manual

KIT CONSISTS OF:
No. Qty Part No. Description
ADVANCE ADAPTERS INC. P/N: 50-0500
P.O. Box 247, 4320 Aerotech Center Way Old Part No: 711005
Paso Robles, CA 93447 PAGE 1 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 11-29-00
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your
conversion, we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of
Advance Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and
other related equipment. These manuals are normally available at automotive dealerships and parts stores.
1. 1 51-0500 ADAPTER CASTING (Ref: 711105)
2. 1 52-0500 COUPLER SHAFT (Ref: 711305)
3. 1 716309 BEARING (FAFNIR #310K)
4. 1 716451 SNAP RING
5. 1 716458 SNAP RING
6. 1 716510 GASKET (GM #862-4709)
7. 1 716568 GASKET
8. 2 716743 SEAL (NAT #417073)
9. 6 723701 HEX NUT
10. 6 723714 3/8"-16 x 1-1/2" STUD BOLT
11. 1 JP001 JEEP INSTRUCTION MANUAL
TURBO 400 TO JEEP DANA 20
SPICER TRANSFER CASES