Advance Adapters 50-0404 - Manual

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific types of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand the modifications or changes that will be required to complete
your conversion, we strongly recommend that you contact our sales department for more information. This Instruction Sheet is only to be used for the assembly
of Advance Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque vales, wiring diagrams and
other related equipment. These manuals are normally available at automotive dealerships and parts stores.
ADVANCE ADAPTERS, INC. P/N: 50-0404
P.O. Box 247, 4320 Aerotech Center Way New Item: (07/97)
Paso Robles, CA 93447 PAGE: 1 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 05-29-07
KIT CONSISTS OF:
No.
Qty. Part No. Description
GM 4L60E AUTOMATIC TO
JEEP DANA 300 TRANSFER CASE
1. 1 51-0403 CASTING
2. 1 51-0404 ADAPTER RING
3. 1 52-0402 OUTPUT SHAFT
4. 1 300619 SENSOR
5. 1 716070 RELUCTOR RING
6. 1 716511 "O"-RING
7. 1 716517 GASKET
8. 4 720046 10mm 1.5 THREAD BOLT S.H.C.S.
9. 6 723701 3/8"-16 HEX NUT
10. 10 723704 LOCK WASHER
11. 6 723712 STUD BOLT 3/8"-16 x 3-1/2" LG.
12. 1 JP001 JEEP INSTRUCTION MANUAL
SHIPPING NO
TE!
716070 must be installed on 52-0403 before shipping.
OPTIONAL ITEMS:
No.
Part No. Description
1 716021 CROSSMEMBER
Sensor note: The sensor in this kit was changed in October 2005. This sensor will match up with the GM pigtail P/N
88987993 or Carquest P/N TX3A. The old sensor used in earlier kits matches up to GM pigtail P/N 12085498.