Advance Adapters 50-0230 - Manual (Page 2)

51-0205
DVANCE
DAPTERS
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components
will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly
recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We
recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally
available at automotive dealerships and parts stores.
ADVANCE ADAPTERS INC. P/N: 50-0230
P.O. Box 247, 4320 Aerotech Center Way New Item: (12/00)
Paso Robles, CA 93447 PAGE 2 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 05-21-14
DODGE NV4500 5 SPEED 29 SPLINE
TO BRONCO DANA 20
make sure that the shafts do not bottom out internally. If there is any interference problem, it may be necessary to grind
the end of the new output shaft to obtain the proper length.
A shifter bracket has been provided for a "T" style T/C shifter handle. Before installing your transmission and transfer
case assembly in your vehicle, check the fit of this linkage and bracket. To fit the bracket to your transmission assembly,
you will be required to modify the stock Dodge adapter housing. (See photos Page 3).