beautypg.com

Advance Adapters 50-0223 User Manual

Kit consists of

background image

ADVANCE ADAPTERS INC.

P/N: 50-0223

P.O. Box 247, 4320 Aerotech Center Way

New Item: (01/98)

Paso Robles, CA 93447

PAGE 1 OF 3

Telephone: (800) 350-2223

Fax: (805) 238-4201

Page Rev. Date:

01-30-14

SPECIAL NOTE:

The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components

will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly
recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We
recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally
available at automotive dealerships and parts stores.

KIT CONSISTS OF:

No.

Qty

Part No.

Description

1.

1

51-0224

ADAPTER CASTING

2.

1

52-0223

16 SPLINE SPUD SHAFT (29T INTERNAL)

3.

1

715532 KIT

TOY L/C T/C SHIFT BRACKET - SHORT ASSY.

4.

1

716199

BEARING RETAINER FOR 716301 BEARING

5.

1

716301

SEALED BEARING

6.

1

716507

GASKET

7.

8

720046

10mm-1.5 x 40mm S.H.C.S.

8.

2

723735

3/8" FLAT WASHER

9.

2

723739

3/8"-16 x 7/8" H.H.C.S.

10.

5

724303

7/16" LOCKWASHERS

11.

8

724324

7/16" HIGH COLLAR LOCK WASHER

12.

3

724345

7/16"-14 x 5" HEX HD BOLT

13.

2

724349

7-16"-14 x 1-1/2" H.H.C.S.

14.

1

728701

NYLON NUT

15.

1

728702

7/8" FLATWASHER

16.

1

TLC001

LAND CRUISER INSTRUCTION MANUAL

17.

1

NV001

NEW VENTURE INSTRUCTION MANUAL

DODGE NEW VENTURE MODEL 4500 5 SPEED

29 SPLINE OUTPUT TO TOYOTA L/C 16 SPLINE

NOTE:

This kit will work

ONLY

with Heavy Duty Dodge NV4500 5-speed transmissions.

NO EXCEPTIONS

.

CAUTION:

There are two 3/8" holes located on the side of the adapter for the mechanical shifter linkage. If your vehicle
has a 3 speed vacuum type shifter, these holes are not going to be used. They will need to be plugged with the
hardware provided and small amount of silicone.