Advance Adapters 50-0218 - Manual (Page 2)

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components
will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly
recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We
recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally
available at automotive dealerships and parts stores.
ADVANCE ADAPTERS INC. P/N: 50-0218
P.O. Box 247, 4320 Aerotech Center Way New Item: (7/95)
Paso Robles, CA 93447 PAGE 2 OF 4
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 04-04-02
NEW VENTURE 4WD MODEL 4500 5 SPEED
TO GM NP205 1971-1979 27 SPLINE
4. The bolt pattern on the front side of the New Venture gear box is unique to only late model GM transmissions. The
original GM bellhousing provides a slave cylinder on the passenger side of the vehicle that will interfere with the early
GM front driveshaft. We have a new aluminum bellhousing that will have this bolt pattern provided for all Chevy V8
conversions.
5. The NP205 transfer case must be equipped with a 27 tooth male input spline as illustrated. This shaft is common
to all GM NP205 transfer cases used with the automatic TH350 transmission.