Advance Adapters 50-0217 - Manual (Page 2)

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components
will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly
recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We
recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally
available at automotive dealerships and parts stores.
ADVANCE ADAPTERS INC. P/N: 50-0217
P.O. Box 247, 4320 Aerotech Center Way New Item: (7/95)
Paso Robles, CA 93447 PAGE 2 OF 4
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 04-04-02
NEW VENTURE 4WD MODEL 4500 5 SPEED
TO GM NP205 1971-1979 10 SPLINE
As you slip the coupler over the splines, the silicone will fill the voids on the splines. We also recommend that you
take the excess silicone that should have squeeze inward towards the center of the coupler and smooth it out with
your finger. This will seal the splines to avoid oil transfer. Let the silicone dry for 6 hours before installing the
transmission to minimize the chance of silicone getting into the NV4500 tailhousing.
Make sure both gear boxes have vents to prevent gear-generated pressure.