Advance Adapters 50-0215 User Manual
Page 2
NV4500 - GM 4WD OUTPUT TO
TOYOTA TRUCK 21 TOOTH TRANSFER CASE
ADVANCE ADAPTERS, INC.
P/N: 50-0215
P. O. BOX 247, 4320 Aerotech Center Way
New Item: (6/95)
Paso Robles, CA 93447
PAGE 2 OF 2
Telephone: (800) 350-2223
Fax: (805) 238-4201
Page Rev. Date:
08-25-95
SPECIAL NOTE:
The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any
of the components will void any possible warranty or return privileges. If you do not fully understand modifications or changed that will be required
to complete your conversion, we strongly recommend that you contact our sales department for more information. This instruction sheet is only to
be used for the assembly of Advance Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specific
torque values, wiring diagrams and other related equipment. These manual are normally available at automotive dealerships and parts stores.
NOTES:
1. This kit can only be used with
GM 4WD New Venture 5 speed
transmissions.
2. The new transmissions will
require a special bellhousing or
modified scatter shield. Advance
Adapters is manufacturing a new
GM and AMC bellhousing that will
accept the NV4500.
3. The input gear on your trans-
fer case will need to be shortened.
If you fail to do so, the shaft will
bottom out inside coupler and
adapter will not bolt together.
DO
NOT FORCE TOGETHER.