Advance Adapters 50-0207 - Manual (Page 4)

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components
will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly
recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We
recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally
available at automotive dealerships and parts stores.
ADVANCE ADAPTERS INC. P/N: 50-0207
P.O. Box 247, 4320 Aerotech Center Way Kit Revised (10/96)
Paso Robles, CA 93447 PAGE 4 OF 4
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 11-17-05
DODGE 4WD TRANS-23T NV4500 5 SPEED
TO FORD NP205/208 & B/W T/C's
In order to provide clearance for the shift mechanism on the NP 205 T/C, you must make a small relief area in the
original 4WD tailhousing. If you do not have a milling machine, then you can remove this excess material by using
a drill press and drilling numerous holes. The photos on this page illustrate the modifications required.