Advance Adapters 50-4708 - Manual

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific types of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand the modifications or changes that will be required to complete
your conversion, we strongly recommend that you contact our sales department for more information. This Instruction Sheet is only to be used for the assembly
of Advance Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque vales, wiring diagrams and
other related equipment. These manuals are normally available at automotive dealerships and parts stores.
ADVANCE ADAPTERS, INC. P/N: 50-4708
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE: 1 OF 1
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 10-08-12
IN HOUSE INSTRUCTIONS
No.
Qty. Part No. Description
GM SM465 TO NP205
STOCK ADAPTER
1. 1 51-4708 GM SM465 X NP205
2. 1 716515 SM465 GASKET
3. 1 716572 NP205 GASKET
4. 1 716763 SEAL
5. 1 723701 3/8-16 NUT
6. 16 723704 3/8" LOCKWASHER
7. 1 723711 3/8"-16 X 2.0" STUD BOLT
8. 15 723723 3/8"-16 x 1-1/2" H.H.C.S.
This casting is a replacement for the stock SM465 to NP205 adapter.
The seal should be installed on the transfer case side with the open side of the seal facing the transfer case.
If this casting in being used with a 52-9502 coupler and you are using a 27 spline NP205 transfer case, the seal in the
kit must be replaced with seal P/N716728 or CR 17231.