Advance Adapters 716133 - Manual (Page 3)

JEEP AMC TURBO 400 TO
CHEVY & BUICK ENGINES
ADVANCE ADAPTERS INC. P/N: 716133
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE 3 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 07-07-00
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void
any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that
you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service
manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships
and parts stores.
Due to the overlapping bolt pattern of the AMC & the GM pattern, the adapter plate was designed to
rotate the transmission 10 degrees towards the driver's side. This will cause your transfer case to be
rotated higher into the floorboard, which normally will not cause any problems. However, the
crossmember foot on the stock or conversion transfer case adapter will have this same rotation. You
will need to shim your rubber mount to fit properly.