Advance Adapters 712591 - Manual (Page 3)

JEEP NV3550 5SP TRANSMISSION TO
CHEVY & BUICK ENGINES
ADVANCE ADAPTERS INC. P/N: 712591
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE 3 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 05-24-04
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion,
we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter
components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment.
These manuals are normally available at automotive dealerships and parts stores.
NOTE: If using a Chevy V8 168 tooth flywheel, a Vortec V8 or Vortec V6 with a 168 tooth flywheel, you will be
required to use a special starter. Along with the starter comes a slave cylinder spacer for the bellhousing to clear the
new starter. You will also be required to exchange release arm
P/N 716179 for P/N 716179V . This longer arm will
compensate for the slave cylinder spacer.