Advance Adapters 712577 User Manual
Page 2
![background image](/manuals/550563/2/background.png)
GM BELLHOUSING FOR USE WITH
NV4500 TRANSMISSION
ADVANCE ADAPTERS INC.
P/N: 712577
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE 2 OF 2
Telephone: (800) 350-2223
Fax: (805) 238-4201
Page Rev. Date:
05-06-03
SPECIAL NOTE:
The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void
any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that
you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service
manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships
and parts stores.
NOTES:
1.
Be sure to grease inside pocket diameter of bearing. This will provide lubrication
on the bearing retainer.
2.
Release bearing should have .060" clearance between fingers and face of bearing.
3.
Clutch disc should have .030" clearance between flywheel and disc when fully
disengaged.
4.
On large diameter 168 tooth flywheels it may be necessary to grind additional
clearance on the lower inside diameter of the bellhousing. The bellhousing is
designed for a maximum flywheel thickness of 1.188".