Advance Adapters 712555 - Manual (Page 2)

ADVANCE ADAPTERS INC. P/N: 712555
P.O. Box 247, 4320 Aerotech Center Way New Item: (7/96)
Paso Robles, CA 93447 PAGE 2 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 REV DATE: 02-25-97
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion,
we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter
components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment.
These manuals are normally available at automotive dealerships and parts stores.
DODGE NV4500 5 SPEED (Gas) 4 CYLINDER
AMC JEEP ENG./AX4 BHSG. (Int. Slave Cylinder)
NV4500 to properly fit. We supply Part No. 716053 for the transfer case modification.
11. If you would like to eliminate the internal hydralic release bearing design, you could upgrade to the 1995-96 Jeep
design that uses an external slave cylinder. This would require kit # 712559, and a new bellhousing, slave cylinder,
throw out bearing and clutch arm. The only difference with the adapter is the front bearing retainer on the new
transmission.