Advance Adapters 712549 User Manual
Page 3
NOTES:
1. Be sure to grease inside pocket diameter of bearing. This will provide lubrication on the bearing retainer.
2. Release bearing should have .060" clearance between fingers and face of bearing.
3. Clutch disc should have .030" clearance between flywheel and disc when fully disengaged.
4. On large diameter 168 tooth flywheels, it may be necessary to grind additional clearance on the lower inside
diameter of bellhousing. The bellhousing is designed for maximum flywheel thickness of 1.188".
11" CLUTCH ITEMS:
11" CLUTCH PRESSURE PLATE (
PART #CF165552
HIGH -PROFILE.)
11" CLUTCH DISC. (
PART #281226
1-1/16" 10 SPL.)
CLUTCH RELEASE BEARING (
PART #N1714
)
10.5" CLUTCH ITEMS:
10.5" CLUTCH PRESSURE PLATE. (
PART #CF360056
HIGH-PROFILE.)
10.5" CLUTCH DISC. (
PART #381021
1-1/16" 10 SPL.)
CLUTCH RELEASE BEARING (
PART #N1714
)
A/A BELLHOUSING. (REF)
SLAVE CYL. GUSSET WILL
NEED MODIFICATIONS IN
ORDER TO SEAT AGAINST
BELLHOUSING FLANGE
ADVANCE ADAPTERS INC.
P/N: 712549
P.O. Box 247, 4320 Aerotech Center Way
New Item: (6/99)
Paso Robles, CA 93447
PAGE 3 OF 3
Telephone: (800) 350-2223
Fax: (805) 238-4201
Page Rev. Date:
07-02-01
SPECIAL NOTE:
The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components
will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly
recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components.
We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are
normally available at automotive dealerships and parts stores.
Bellhousing
Slave installation
GM release arm
Grinding may be necessary on the slave bracket to provided
clearance between the bracket the the bellhousing bolt.
o
o
o
o
o
CHEVY BELLHOUSING TO
FORD TRANSMISSIONS(Jeep T18 77-79)
P/N 716331
(KIT)