beautypg.com

Caution, Chapter 10 – emergency operation – Snorkel TB125J User Manual

Page 59

background image

T125J/TB125J – 0192214

59

Figure 10.2 – Lower Controls

Upper Controls

For the upper controls to be operational:

• the battery disconnect switch must be in the on

position.

• the start switch at the lower controls must be turned

on.

• the emergency stop button at the lower controls

must be in the on position.

• the control selector switch at the lower controls must

be in the platform position.

Use the following procedure to operate the machine

using the emergency power system from the upper

controls.

1. Pull the emergency stop button outward (refer to

Figure 10.3).

2. Turn the start switch on.

3. Step down on the platform foot switch (refer to Figure

10.4).

If the main hydraulic system fails, the aerial platform

may be lowered and stowed using the emergency

power system. The main boom may be lowered using

the emergency bleed down system. The machine may

be towed if the drive system fails. Refer to Emergency

Power System, Emergency Lowering or Towing for the

appropriate procedure.

Emergency Power System

The emergency power system can be used to operate

the machine from the lower or upper controls.

Caution

The emergency power system is for emergency

lowering and stowing only. The length of time the

pump can be operated depends on the capacity

of the battery. Do not use this system for normal

operation.

Only use the emergency power system if the main power

system fails.

Lower Controls

Use the following procedure to operate the machine

using the emergency power system from the lower

controls.

1. Place the battery disconnect switch in the on position

(refer to Figure 10.1).

Figure 10.1 – Battery Disconnect Switch

2. Place the control selector switch (refer to Figure

10.2) in the lower controls position.

3. Pull the emergency stop button outward.

4. Hold the ground operation switch in the on position

while holding the engine/emergency power switch

in the emergency power position.

5. Hold the appropriate function toggle switch in the

desired direction.

Chapter 10 – Emergency Operation

Battery Disconnect Switch

Ground

Operation

Start

Emergency

Stop

Engine/

Emergency

Power

Control

Selector

This manual is related to the following products: