Snorkel POP UP EC08 - Manual (Page 8)

Section 2
SPECIFICATION
Page 7 of 25
Operating site
Select a site for the machine from which the platform will be able to reach the
required work area. A visual inspection of the operating site should be made
before setting up the machine. Particular attention should be given to the
following items:
1. Ground conditions
Ensure that the ground on which the Pop-Up+ is to operate is capable of
supporting the weight of the machine (including the weight of the operator plus
tools and materials). Be aware of floors or coverings (e.g. manhole covers) that
may not withstand point loadings exerted by the castor wheels.
and legs are fully deployed before the work platform can be raised. It is essential
that each of the four stabiliser feet are located on firm, solid ground. The Pop-Up+
auto brake kit enables the removal of stabilisers for use in 0m/sec wind conditions.
2. Ground flatness
The Pop-Up+ must only be operated on flat (0º chassis inclination) and level
surfaces. The allowable chassis inclination is indicated when the spirit level
bubble is within the marked limits. All castor wheels must be in full contact with
the ground.
Noise and vibration
Noise levels emitted from this machine do not exceed 70 dB(A). Hand and
arm vibration experienced on this machine does not exceed 0.5 m/s 2 .
Limitations
The Pop-Up+ is limited to operation indoors. The machine must not be used
outdoors. Please consult the manufacturer if you are unsure of any application
for which the machine is to be used.
This machine has been tested for Electromagnetic Compatibility (EMC)
however, operation near to high powered radio transmission apparatus
(e.g. radar, antennae) or within strong electrical and/or magnetic fields may
affect some features of this product
WARNING
THIS MACHINE HAS NOT BEEN DESIGNED FOR OPERATION WITHIN
POTENTIALLY EXPLOSIVE ATMOSPHERES
WARNING
THIS MACHINE IS NOT ELECTRICALLY INSULATED AND MUST NEVER
BE USED FOR LIVE LINE WORKING. DEATH OR SERIOUS INJURY CAN
RESULT FROM CONTACT WITH, OR INADEQUATE CLEARANCE FROM,
ELECTRICAL CONDUCTORS
Operator’s Safety and Maintenance Handbook (
In indoor exposed areas with wind speeds up to 12.5m/sec the Pop-Up+ can be
used with a stabiliser pack. An interlock system ensures that the stabiliser beams
3. Obstructions
When manoeuvring, raising and lowering, ensure that there are no obstructions
or persons that may be struck by the platform.
Pop-Up+ dual use machine rev.0.0.1.0210)
0120723