Snorkel POP UP EC08 - Manual (Page 26)

Section 7
MAINTENANCE AND
REPAIR RECORD
Page 25 of 25
Daily checks – operator checklist
The following checklist has been provided to enable daily checks to be
undertaken prior to use of this Pop-Up+. These checks should be carried
out each working day or at the beginning of each shift. The purpose of the
checks is to identify any wear and tear or malfunction of the machine’s
components and systems.
WARNING
FAILURE TO UNDERTAKE THESE CHECKS MAY RESULT IN DEFECTS
ON, OR DETERIORATION OF THIS POP-UP+ GOING UNDETECTED AND
POSSIBLY RESULTING IN AN UNSAFE MACHINE
Note that Regulation 8 of the Lifting Operations and Lifting Equipment
Regulations 1998 (LOLER) require that persons using lifting equipment
have appropriate training and instructions to enable them to identify
whether lifting equipment is safe to use.
Machine number
1. Prior to operating the platform, the following items must be checked:
2. Use raise, lower and emergency stop functions to ensure correct operation.
Should any defects be identified in any of the above areas, these should be
reported to your employer. It may be necessary to further seek assistance from
the supplier of the machine, this may be the hire company or the manufacturer.
You should only rectify any defects if you are authorised and competent to do so.
Do not use the machine unless each of the items above is checked and
stated OK.
Structure
Platform
Castors
Rear manual brakes
Front auto brakes
Hydraulic oil
Oil leaks
Date
Checked by
Battery condition
Raise and lower
Emergency stop
Emergency lower
Limit switch
Safety decals
Stabilisers
(optional if Pop-Up+ is fitted with auto brakes)
OK? (please tick) OK? (please tick)
Operator’s Safety and Maintenance Handbook ( Pop-Up+ dual use machine rev.0.0.1.0210)
0120723